Expecting a new addition to your family? Create your own personalized baby gifts with the GO! Burp Cloth die. With one pass through your AccuQuilt GO! Or GO! Big fabric cutter, create 3 complete burp cloths. The fat quarter friendly die works with a variety of fabrics, including cotton, fleece, flannel, CuddleⓇ, terry cloth and more. Embellish your project with embroidery or GO! appliqué shapes 7 inches by 5 inches or smaller.Compatible with GO! Big (55500) & GO! (55100S) Fabric Cutters
Recommended Cutting Mat: 10" x 24" Cutting Mat (55113) (not included)
Die Board Size: 10" x 24"
Cut Size: 9” W x 18 ½” H (22.9 cm x 47 cm)
Finished Size: 8 ½” W x 18”H (21.6 cm x 45.7 cm)
How to Die Cut Burp Cloths: For best cutting results, position fabric on the lengthwise grain (straight of grain) as it goes under the roller.
TIP: The die is designed to cut three complete burp cloths in one pass through the cutter.
For each color: Cut 1—19” x width of fabric (WOF) strip. Fanfold to 9 ½” on die. Sub cut into 3 burp cloth pieces of each fabric. (6 total pieces)
Why Quilters Love the GO! Burp Cloth Die:
Due to popular demand, the GO! Burp Cloth die is now available in both GO! And Studio.
If you need a baby gift or just want an easy sewing project these burp cloth shapes can be cut in minutes and sewn quickly and easily!
GO! Burp Cloth is a DIY (“do-it-yourself”) Project die. These are popular shapes of projects that you make for yourself, to give as gifts or to sell.
To template required. The GO! Burp cloth die includes a perfectly symmetrical, standard-sized burp cloth shape that is typically difficult to cut by hand.
Cut three complete burp cloths in one pass thru the cutter (two cuts needed per burp cloth).
Make burp cloths out of a variety of fabrics cut with your GO! Burp Cloth die: flannel, terry cloth, waffle, fabric, Cuddle® fabrics, cotton and more!
Make it personal! The GO! Burp Cloth is designed to work with appliqué shapes that are 7”x5” or smaller, such as the GO! Carefree Uppercase and Lowercase (55092, 55491) Alphabet sets, or embellish your burp cloths with embroidery.
Packaging includes a free pattern to get your started.
Fat Quarter Friendly
Storage: Organize GO! dies with AccuQuilt GO! Die Storage Rack (55115).
With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
Use cutting mats that matches size of each die.
For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
Some dies feature specially designed corners to aid in alignment and pre-cutting.
For fast applique, apply fusible web to fabrics, then cut shapes with dies.
Use good quality fabric to reduce fabric stretch.
It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.